GN125 Fork Front Shock Suzuki Motorcycle Parts GN125 Fork Front Shock (DISC BRAKE)

Overall Length: 310 / 330MM

Cylinder diameter: 111 (mm)

Restoration resistance: 2 (N)

Compression resistance: 1 (N)

Shock pressure: 22

Working pressure: 3

Ultimate load: 1

Kennedy stiffness: 22

Pre-compression: 2

1, hydraulic damping type rear shock absorber

Structure of hydraulic shock absorber with suction pump is similar, the difference is in the steel at the upper end of the hydraulic shock absorber is closed, and the valve holes. When the rear wheel meets the road bumps during impact, the cylinder moves upward, piston, cylinder relatively moving down. At this time,piston valves are open to the inner cavity of the piston, cylinder side of the oilwithout any resistance to the piston side. At the same time, this part of the oilthrough the small hole in the bottom of the inflow valve between the inner, outer cylinder oil cavity. This effectively attenuated the uneven road facing the shockload of vehicle. And when the wheel over the raised ground fall downward, the cylinder will follow the downward movement of the piston relative to the cylinder,will move upward. When the piston moves up the oil way at the bottom of the valve to the inner cylinder, the inner cylinder piston on the side of the oil throughholes on the underside to the piston valve. At this time when the oil flow through the small hole in the process, will be a lot of resistance, damping effect thus produced, played the purpose of damping.

Specifications:

Material: ABS, Normal Plastic, Iron, Steel,Alloy Rubber

Applications:

All the spare parts are used for repairing.

Our Services

Our product is your best choice; we can offer you 1 year warranty!

Beside we also offer other spare parts available as below:

1. Engine related: like cylinder, piston kit, piston ring, clutch related parts, connecting rod, gaskets
2. Body related: all frames, plastic cover, hood, kick pedals, gear shift
3. Brake System: brake pad, brake rod, brake shoe, brake
4. Suspension System: front forks, rear shock absorbers, damper rubber
5 .Air Intake & Exhaust system: like air filters, mufflers, exhaust hose
6. Fuel intake system: carburetor parts, fuel tank, fuel tap, fuel filter
7. Electrical System: battery, lights, CDI, flasher, horn, ignition coil, rectifier, switch key, relay, magneto, meter, spark plug, harness
8. Others: all kind of cables, mirrors, oil seal, gaskets, bearings, gears, tyres, tubes, chains & sprocket:, hubs, seat cushion, handle grip

Specifications:

A,Packing and Delivery Processing:

B,Quality Certificates:

C, LABELING

D, Our Office And Group